2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection

Model NO.: SUP4-S40
Shape: Square
Material: Ceramic
Brand: Blusunsolar
Trademark: LEADER
Transport Package: Polybag + Carton
Specification: TUV and CE
Origin: China
HS Code: 853690190


 2P 500V/600V 40KA House Surge Protector Protective Low-voltage Arrester Device
This surge protector mainly used light volt power distribution system of lightning surge protection or other transient overvoltage. Products built for high voltage dc power supply overheating over-current protection function, can provide grade C for photovoltaic (pv) power system transient protection. Products using 35 mm DIN rail installation, module can change independently, easy to install and maintain, with remote communication alarm interface (dry contact), surge protector to facilitate remote monitoring.


Technical parameters

 
Nominal PV System Voltage 500V 1000V 1200V
MCOV [UCPV] 630Vdc 1170Vdc 1200Vdc
Max System Discharge Current (8/20 µs) [lmax] 40kA 40kA 30kA
Voltage Protection Level [UP] ≤2.5kV ≤4.0kV ≤4.5kV
Voltage Protection Level at 5kA [UP] ≤2.0kV ≤3.5kV ≤4.0kV
Integrated Fuse Breaking Capacity/Interrupting Rating 30kV/1000Vdc 30kV/1000Vdc 30kV/1200Vdc
Technology Short-Circuit Interruption (SCI) Overcurrent Protection
Operating Temperature Range [TU] −40ºC to +80ºC
Nominal Discharge Current (8/20 µs) [(DC+/DC−)­­> PE] [In] 12.5kA
Response Time [tA] <25ns
Operating State/Fault Indication Green (good)/Red(replace)
Conductor Ratings and Cross­Sectional Area: Minimum 60/70ºC 1.5mm²/14AWG Solid/Flexible
Maximum 60/70ºC 35mm²/2AWG Stranded/25mm²/4AWG Flexible
Mounting 35mm DIN Rail per EN 60715
Enclosure Material UL 94V0 Thermoplastic
Degree of Protection IP20
Capacity 3 Modules, DIN 43880
Standards Information: IEC 61643­11 Type 2,IEC 61643­1 Class II
Product Warranty Five Years**


Remote Contact Signaling
Remote Contact Signaling Type Changeover Contact
AC Switching Capacity (Volts/Amps) 250V/0.1A
DC Switching Capacity (Volts/Amps) 250V/0.1A; 125V0.2A; 75V/0.5A
Conductor Ratings and Cross-Sectional Area for Remote Contact Signal Terminals 60/75ºC Msx. 1.5mm²/14AWG Solid/Flexible
Ordering Information Order from Catalog Numbers Above

Dimensions and Main Drawings

2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection


 
 


 

Contact information:

Lydia Deng

Tel: +86 769-3335-6021 | Mob: + 86 132 2940 9650
 
 
 
   


 

Lan Network Cable widely used at Voice data, Graphic image, Multi-media, Security monitoring and other data transmission. Combined with Keystone Jack Patch cords, and patch panel, it provides excellent and stable performance. All series of the Lan Network Cable products include shielded and unshielded Category 5E, Category 6, Category 6A and Category 7 and other fiber optic products. 

The solution is not only for hospital, government manufacturingand other environments. For different application, you can find our product accordingly.

Cat.6A-FTP



Lan Network Cable

Lan Network Cable, Lan Cable, UTP Lan Network Cable, FTP Lan Network Cable

NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , http://www.yltelecom.com

Posted on