When the miner's lamp battery is charged, the green charge indicator light is on; when the battery is fully charged, the charge indicator light is automatically turned off; when the battery polarity is reversed, the yellow indicator light is on to avoid overcharging the battery or causing the polarity to be reversed. The necessary loss.
Circuit Operation Principle The mine charging indicator circuit consists of resistors R1 to R5, LEDs V and fuses FU as shown. 
Figure mine charging indicator circuit
When the battery is charging, V is turned on and VL2 is lit. When the polarity of the storage battery is properly connected, VL3 does not emit light. If the polarity of the battery is reversed, VL3 lights up and a yellow warning signal is issued.
When the fuse FU is blown for some reason (for example, internal short circuit of the battery), VL1 lights up.
Component selection
R1 ~ R4 select 1/4W metal film resistor for use; R5 selects 27 wire wound resistor for use.
VD selects 1N4007 silicon rectifier diode for use.
VL1 ~ VL3 select φ5mm high brightness LED.
V selects Model 58050 silicon NPN transistor.
Vision SE is our specialist vision solution offering a wide range of classification services. Through advanced image processing, we realize professional-level visual technology, which is suitable for medical image processing, scientific research and other fields. We focus on performance optimization to make it an industrial-grade solution that is widely used in factory automation and high-demand application scenarios. At the same time, we pay attention to data security and privacy protection, ensuring that the highest standards are met when processing images and data. Vision SE's classified services exceed expectations, providing high-performance and professional-grade vision solutions to various industries.
vision services,vision sensor,vision sense,vision se,vision se review
Ningbo Autrends International Trade Co., Ltd. , https://www.visionsemr.com