Webcams are already very popular now, and my family used to use the same kind of regular TF card. But the bad part is that it has a power cord hanging down and is more suitable for users on the table, not suitable for hanging ceilings. After all, each camera must occupy a socket. If you want to put it on the edge of the window, you can't reach the socket.
Recently, I wanted to install a camera on the living room bedroom and a few back entrances. Because the family building on the second floor of this building was in the previous section, the family came back and discovered that the family had been robbed by the thief. I was scared to think about it. So I plan to set up cameras in the living room, balcony, toilet and a small bedroom respectively, and when I'm out, I can watch the situation at home. The type of power cord that I used before would certainly not be considered.
However, Jingdong searched for "wireless camera" and came out so many times that I carefully watched the buyer's orders, all of which are wired.
Is it really okay to waste consumer feelings with fake titles?
Those who searched out all of them were not suitable for me. I was right to say that I had a penny, a dime, and two cents. I finally entered a new section of U.S. nets. At the time, JD.com had 1000-400. Netgap coupons, using 12 interest-free gnaws into the teeth (with two cameras, I'm ready to buy two more, you can group up to 5)
Out of the box to forget to shoot, always feel less (what to say with 10 pieces of pvc background cloth to take a single is good-looking)
Let's talk about the camera first. The webcam's camera is not directly connected to the WiFi, but through an intermediary (base station). Camera - base station, base station - router (wired connection). I understand that the advantage of this is that the signal is strong and undisturbed. I guess it is not 2.4G or 5G.
The camera is battery-powered so it can be disconnected from the power cord. Official propaganda can work for six months. I just started thinking that I was overly publicized, and later found out that it could be set to detect moving objects and then work again, so I saved electricity
The battery model is "+123". It hasn't been seen at all. There should be no supermarket and it can only be bought online.
The battery is positive and negative, and the inside is marked.
The camera is sucked together with a magnetic rubber pad and a base behind the buttocks. The base is relatively rough and can provide friction to maintain the camera's posture.
Designed to be semi-spherical for more posture
The base is fixed to the wall by expansion bolts, that is, holes are to be made in the wall and the base is not magnetic. This point is not humane, the position of the hole base is not good to move, there is a hole on the wall more ugly. If you remove it with double-sided tape, it is difficult to clean it.
The base cannot suck on the refrigerator
But his own ass is magnetic and can suck
After installing the camera with a battery, there are 190 grams. The wall is a bit heavy. I don't know if the magnet will fade out after a long time.
Base station and camera have "SYNC" synchronization button, need to press when establishing connection.
You must first go to this app and register your account. The video is in the cloud and will not be retained locally. NetGrid provides 7 days of free cloud storage. Before I thought his video was stored in the base station.
App's interface is relatively refreshing, there is nothing messy, there is no domestic camera live broadcast on the left is the mode of work, in the middle is the home page can directly see the screen, power status, the right is a video shot down (dirty home to forgive me add mosaic)
There are several modes, and now is the motion detection mode, that is, after the object passes through him, it starts recording. This test should be the infrared bar I guess.
It should be the following ball to detect.
Then when he detects the action and starts recording, it will turn on a light. This is also unscientific. When a thief comes in, he will also turn on the light to remind him, "Hey, I'm starting a video here." People don't pick you up directly. Did you lose it?...
Away mode: After positioning yourself, set a radius, as long as the camera out of the circle to start working, not working at home, without manual switching, this is where I think the most intelligent.
This video was recorded when I passed it. The success rate of the trigger was very high and basically captured.
The quality of the picture is relatively normal. I thought at the time that a 3,000-piece camera would have this quality? Later, it was discovered that this is an ordinary picture quality, and it can be changed to high picture quality in order to save power.
The night shot mode is automatically turned on when there is not enough light, and the definition is fine. There is no change in the basic and bright time.
Did not find someone to punch, first put a few photos to take a look at the effect. The camera is still hidden because there is no wire
The camera also has some accessories to buy, I want to hang the ceiling, ready to buy a ball base and protective cover
to sum up
advantage:
1, high value
2, capture action high success rate, stable operation
3, because it is detected motion video, so basically no fever
4, long battery life, spent a few days a grid of electricity did not fall
Shortcomings
1, the price is more expensive
2, the base is not magnetic, must be punched in the wall
3, camera will light when recording
Box Header Connector,2.0Mm Box Header Connector,2.54Mm Box Header Connector,2.54Mm Ejector Header Connector
Dongguan City Yuanyue Electronics Co.Ltd , https://www.yyeconn.com