Outdoor lighting location lighting measurement method (accessory)


1 Subject content and scope of application

This standard specifies the lighting measurement method for outdoor lighting places.

This standard applies to the measurement of outdoor lighting such as roads, sports tasting squares. Other outdoor places (such as port terminals, apron, etc.) can also be used as reference.

2 Reference standard

GB 5697 Ergonomic lighting terminology

JJG 221 Luminance Meter

JJG 245 illuminometer

JJG 1032 Optical Radiation Measurement Terms and Definitions

3 measuring instruments

3.1 Illuminance meter

3.1.1 For illuminance measurement of outdoor lighting, a primary illuminance meter should be used. For illuminance measurement of road and plaza lighting, an illuminance meter capable of reading 0.1 lx should be used.

3.1.2 The calibration of the illuminometer shall comply with the provisions of JJG 245.

3.2 Luminance meter

3.2.1 The brightness measurement is best to use the first-level brightness meter. When only the average brightness is required, the integral brightness meter can be used. In addition to measuring the average brightness, it is also required to obtain the total brightness uniformity and the brightness uniformity. The telescope's luminance meter should have a viewing angle of less than or equal to 2 in the vertical direction and 2-20 in the horizontal direction.

3.2.2 The calibration of the luminance meter shall comply with the provisions of JJG 211.

For details, please click to download the attachment: http://download.alighting.cn/Soft/20090319/3.rar



1

Pipeline Oil Contamination Detection Sensor

This decice is installed in the cooling water line of ship and is designed to detect oil in cooling water.This system consists of oil detection pot,capacitive compact switch and control unit.Oil detection pot for separating oil and water has not cock valve for isolating the input and output line.Capacitive Type Oil Detector is installed in oil detection pot for separating oil and water has not cock valve for isolating the input and output line.Capacitive type oil detection pot,detecting oil Isolated form water on the top of oil detection pot.Control unit receive whether it is deteted or not in signal from the capaciteve compact switch and convert point of contact to relay contact.

Pipeline Oil Contamination Detection Sensor,New Ss Oil Pressure Sensor,Oil Pressure Sensor,Ss Oil Pressure Sensor

Taizhou Jiabo Instrument Technology Co., Ltd. , https://www.taizhoujiabo.com

Posted on