Can you "record" the Ford remote key in five steps?

Mobile phone crystal 3.2*2.5mm 3225 26M (26.000MHZ)

Single chip microcomputer STM32L151CCU6

MOS power IC full range

RF cable can be customized for other specifications

Today, I will introduce you to an "engineer level" skill. The so-called engineer level skills here refer to some special "instructions" that product development engineers can "call". First, use the iphone engineer level skills as an example. Is the screen shot of the fourth brother's mobile screensaver, can you find a difference?

If you are not a "finding" master, please pay attention to the area in the upper left corner for displaying the "signal strength"; one is the traditional dot grid number and the other becomes a negative number; how to do it? In fact, it is to call an "engineer level" instruction, as long as 5 steps:

1. Open the iPhone dial pad

2. Enter: *3001#12345#* and press the dial button;

3. Then you will see the Field Test program opened;

4. Then you will see the signal strength in the upper left corner replaced by a negative number (in dBm). The problem is that when you exit the Field Test program, the display returns to the default intensity bar/point. If you want to keep the digital reality, go to the next step:

5. In the Field Test program, press and hold the power button until you see the “Slide Shutdown” screen appears. Then don't shut down, but hold down the Home button until you return to the main interface.

Ok, now you find that your signal strength has been changed to digital display mode, and you can switch between the two display modes by clicking on the top left corner.

Get this skill, just try it!

As the title, the five-step "recording" Ford remote control key also has an engineer-level skill. Before the introduction, the fourth brother solemnly stated that please do not use this technique to engage in any illegal activities, and also give the Ford owners a wake-up call. Keep your keys safe.

First of all, you need two Ford models of any type (requires remote key function, assuming A and B), parked within the sensing range not exceeding the remote control key (usually 50 meters, the verification test is within 10 meters) ); the next step is to start:

The first step is to grab the A and B remote keys at the same time, then randomly select the A or B key (assuming the A car is selected), open the A lock and enter the cockpit, sit in the driver's seat, press the inside of the car. "unlock" button and insert the car key into the ignition hole;

Step 2: Quickly turn the car key from the "OFF" position to the "ON" position, repeat 8 times, and finally stop at the "ON" position (what, you don't know the "ON" position? That is the file before the engine can be started. Or the position that will automatically return after launching. Please be sure to complete it within 10 seconds.

Step 3: Press any key of a remote control key, then you have 20 seconds (note that it is 20 seconds);

Step 4: Press any key of another key (the function you want to copy), and also have 20 seconds to copy all the key functions of the remote control key, otherwise it will be invalid after one use;

Step 5: Return the A key from the “ON” position to the “OFF” position. You can now try to use the A key to remotely control the B car.

Ok, is this engineer level skill fun? If your family happens to have two Ford and you often take the wrong key, this skill will definitely help you. Of course, if you are a Ford owner, please take care of your own keys, especially the same brand owners who do not trust.