On September 24, 2012, Nichicon announced the development of a new chip-shaped aluminum electrolytic capacitor for the Engine Control Unit (ECU), the "CX Series", which is said to guarantee 2000 hours at 135 °C. Lifetime (after initial and 1000h endurance test at 135°C) ensures low ESR (equivalent series resistance) values ​​at low temperatures of -40°C. This is the first aluminum electrolytic capacitor that can achieve this performance. According to reports, Nichicon's previous product was based on the previously accumulated technology, using a new type of separator and the use of a newly developed solvent that is not easily evaporated as an electrolyte, and optimizing the combination of parts and materials. Although the existing “CZ Series†products are resistant to high temperatures of 125°C and guarantee low ESR values ​​at low temperatures, this new product achieves higher temperature resistance and stable low ESR values ​​at low temperatures. For the harsh vibration environment of the vehicle-mounted products, such as the engine room, the entire series of products can form a vibration-resistant structure.
The new product has a rated voltage range of 10 to 35V and a rated electrostatic capacity of 47 to 470F. There are three sizes, namely φ6.3×10L (mm), φ8×10L (mm) and φ10×10L (mm). Sample shipments will begin in October 2012. Mass production is scheduled to begin at the Nichicon Iwate Factory in April 2013.
In addition to the CX series, Nichicon also announced that it will display the following capacitors at CEATEC JAPAN2012: "LR, LV, LT, LH series" of chip-type aluminum electrolytic capacitors for medium and high voltage; chip-shaped aluminum electrolysis with guaranteed life of 2000 hours at 105°C Capacitor "CM Series"; "PH Series" of aluminum electrolytic capacitors with a rated voltage range of 400 to 450 V, about 20% miniaturization, and a maximum capacity of 50%; about 20% miniaturization and about twice as large as AC adapters High-capacity aluminum electrolytic capacitor "VC series"; about 1.7 times longer life, and can guarantee 10,000 hours of life of aluminum electrolytic capacitors "HW series."
In addition, Nichicon demonstrated the new products developed at the “CEATECJAPAN2012†held at the Makuhari Messe Convention Center from October 2nd to 6th, 2012.
ZGAR PCC KIT
ZGAR electronic cigarette uses high-tech R&D, food grade disposable pod device and high-quality raw material. All package designs are Original IP. Our designer team is from Hong Kong. We have very high requirements for product quality, flavors taste and packaging design. The E-liquid is imported, materials are food grade, and assembly plant is medical-grade dust-free workshops.
From production to packaging, the whole system of tracking, efficient and orderly process, achieving daily efficient output. We pay attention to the details of each process control. The first class dust-free production workshop has passed the GMP food and drug production standard certification, ensuring quality and safety. We choose the products with a traceability system, which can not only effectively track and trace all kinds of data, but also ensure good product quality.
We offer best price, high quality Vape Device, E-Cigarette Vape Pen, Disposable Device Vape,Vape Pen Atomizer, Electronic cigarette to all over the world.
Much Better Vaping Experience!
ZGAR PCC KIT E-Cigarette Vape Pen,ZGAR PCC KIT Disposable Device Vape,PCC SET,ZGAR PCC KIT Vape Pen Atomizer,ZGAR PCC KIT Disposable E-Cigarette OEM vape pen,ZGAR PCC KIT electronic cigarette
Zgar International (M) SDN BHD , https://www.szdisposable-vape.com