Recently, Huizhou Guozhan Group (hereinafter referred to as “National Exhibition Groupâ€) has adopted the LED circuit board produced by the completely environmental protection method, which caused a sensation in the industry. Its technology based on the aluminum-based circuit board with thermal conductivity of 250 or more and the heat-dissipating bracket directly form the circuit. Attracting the attention of many Chinese and foreign LED lighting manufacturers.
At present, Guozhan Group has applied the new wire circuit board mode to LED lighting products, and has introduced various kinds of LED lamps, lights with Christmas trees and solar lighting strips.
According to reports, traditional LED circuit boards can be manufactured through two major pollution processes: electroplating and etching. The complicated process is not only costly, but also the chemical processes such as electroplating and chemical etching in the manufacturing process cause great pollution to the environment. The environmental advantages of traditional circuit boards for LEDs and LEDs themselves are contrary.
Wang Dingfeng, chairman and president of China National Exhibition Group, said in an interview with Gaogong LED that most of the LED lamps are in a dot matrix arrangement mode, which inspires the direct use of wires to form a circuit board. If this inspiration can be achieved, it will not only reduce costs, improve efficiency, but also be environmentally friendly and of more reliable quality. "To this end, the National Exhibition Group invested in the development and design of environmentally-friendly wiring boards as early as three years ago."
Wang Dingfeng revealed that at present, the National Exhibition Group has more than 100 patents, and the market share is increasing substantially.
“Getting cost advantage with technological innovation, and then quickly occupying the largest market share through products with high cost performance, which plays an important role in reducing the cost of LED products and pushing LED products into thousands of households.†Wang Dingfeng said that the LED market is different. In the traditional circuit board market, LED applications with low power and small range of illumination must be the first popular products in LED subdivision products. Although the product is low-end, but the amount is very large, the cake is also very big, and we mainly focus on the market cake, make a big cake, the only way, the enterprise can grow bigger.
Based on the accurate grasp of changes in market demand, in recent years, the LED performance of the National Exhibition Group has doubled, from tens of millions in 2008 to hundreds of millions in 2011. In the first half of this year, the sales of Guozhan Group increased by 30% compared with last year, and the market share reached 60%. Wang Dingfeng said: "For enterprise development, the most important thing is to maintain long-term vitality. This requires not only market foresight, but more importantly, enterprises can be technologically innovative and accurate."
2012 High-tech LED Exhibition Exhibition Address: Guangzhou Poly World Trade Center Expo Booth No.: 2D05
Exhibition date: August 17-19, 2012
At present, Guozhan Group has applied the new wire circuit board mode to LED lighting products, and has introduced various kinds of LED lamps, lights with Christmas trees and solar lighting strips.
According to reports, traditional LED circuit boards can be manufactured through two major pollution processes: electroplating and etching. The complicated process is not only costly, but also the chemical processes such as electroplating and chemical etching in the manufacturing process cause great pollution to the environment. The environmental advantages of traditional circuit boards for LEDs and LEDs themselves are contrary.
Wang Dingfeng, chairman and president of China National Exhibition Group, said in an interview with Gaogong LED that most of the LED lamps are in a dot matrix arrangement mode, which inspires the direct use of wires to form a circuit board. If this inspiration can be achieved, it will not only reduce costs, improve efficiency, but also be environmentally friendly and of more reliable quality. "To this end, the National Exhibition Group invested in the development and design of environmentally-friendly wiring boards as early as three years ago."
Wang Dingfeng revealed that at present, the National Exhibition Group has more than 100 patents, and the market share is increasing substantially.
“Getting cost advantage with technological innovation, and then quickly occupying the largest market share through products with high cost performance, which plays an important role in reducing the cost of LED products and pushing LED products into thousands of households.†Wang Dingfeng said that the LED market is different. In the traditional circuit board market, LED applications with low power and small range of illumination must be the first popular products in LED subdivision products. Although the product is low-end, but the amount is very large, the cake is also very big, and we mainly focus on the market cake, make a big cake, the only way, the enterprise can grow bigger.
Based on the accurate grasp of changes in market demand, in recent years, the LED performance of the National Exhibition Group has doubled, from tens of millions in 2008 to hundreds of millions in 2011. In the first half of this year, the sales of Guozhan Group increased by 30% compared with last year, and the market share reached 60%. Wang Dingfeng said: "For enterprise development, the most important thing is to maintain long-term vitality. This requires not only market foresight, but more importantly, enterprises can be technologically innovative and accurate."
2012 High-tech LED Exhibition Exhibition Address: Guangzhou Poly World Trade Center Expo Booth No.: 2D05
Exhibition date: August 17-19, 2012
Dongguan Pinji Electronic Technology Limited , https://www.iqdatacable.com