Its own machine is equipped in 2014, when most of the time is only a small side through the chassis, the card bar standard recommended phantom is also only a small side through to 2016, the large side of the chassis through a lot, or even see through the whole side, see A lot of chassis always feel that the original old chassis is not only not sideways, but also the noise of the chassis fan is very big. In this, I have two villains in mind, one is to change the villain, one is not changed The villain, for the villain to feel that the original chassis is not only ugly, noisy, no light pollution, this must be changed ah; not for the villain to change the chassis to spend, not too much for the chassis Use, after all, the use of this is also okay, not bad, replaced the chassis did not place, or does not change the good; the results of the villain directly to the villain who did not change, and decided to change Rhythm! ! !
So the Internet to find the chassis, look at the chassis, feel the chassis this thing does not need to spend too much rice, enough enough, it seems to see the Xin Valley lux chassis is good, specifically for the side penetration and the rice is still less, as long as 179 yuan, Decisively. The following is a map:
The packaging was in good condition and it was signed. After the receipt, I found that the pedestal had damaged the courier. I went to the store and gave me the pedestal. I liked the service attitude of the store. I was glad that it was in the official store of Tmall. After-sale protection, the chassis has black and white color, personal like black. First talk about the size of 400mm200mm480mm, the body material is 06.mmspcc steel plate black, support motherboard specifications for ATX/M-ATX/ITX, net weight 4.7kg, graphics limit length 380mm, cpu radiator limit height 159mm.
positive
side
The side is a whole piece of transparent acrylic panel
top
The top has a restart button, a usb3.0 interface, two usb2.0 ports, a headphone jack, and a hard disk light.
Rear side
Three fans can be installed on the front of the chassis, two fans at the top (with dust-proof nets at the top) and support for 240mm water-cooled radiators, one fan at the rear, and two fans at the lower side of the chassis. A total of eight fans can be installed. The optical drive cannot be installed on the front of the chassis. If necessary, you can install an external optical drive. However, for now, the optical drive can use too little.
The interior of the chassis
Can clearly see that the chassis leaves a lot of fan bits, a total of eight, plus the support of the back line, making the inside of the chassis have a better air duct, more conducive to heat dissipation, the chassis back under the power supply, the power cord is all under the back , including hard drives are on the back, making the chassis side look very clean and tidy.
A lot of cable holes are reserved on the back of the chassis, and a better strap is used when going back. The lower back supports two 3.5-inch mechanical hard disks and supports two 2.5-inch solid state disks. All the hard disk drives are fast-locked. Say I use the RGB fan, Taobao buys 15 light fans, a controller with up to 8 fans, 2 lights, the controller controls the speed of the fan's light and light conversion, as we all know, the more noise the fan is, the higher Except for a fan (one fan is nearly 200, and even more than 200 cat fans are silent, as a civilian, I wouldn't have chosen such a fan), in order to achieve a silent effect, I had to reduce the number of fans. My fan program is a total of five chassis cooling fan (absolutely enough for overclocking users, not to mention I'm not overclocking), the chassis front panel 3 fans, a tail, the top one, forming a positive pressure duct . The decibel noise of the 5 fans is not low. In order to achieve a balanced level of heat dissipation and noise, a controller is purchased. Usually only 2 fans are used. The other 3 controllers use another controller, and the controller The power supply was rewired and connected to a remote control switch. Normally, only two chassis fans are used for office or light use. If you play a large-scale game, all five fans are turned on. Later articles may be written about how to change the RGB fan and change the switch. The following is the picture after the job is completed:
The first is the fan remote control switch, the second fan led remote control, a total of 16 colors, you can adjust the 4 modes, the brightness of the light, breath speed can be adjusted.
Double fan
5 fan full open map
For the use of this chassis for a period of time to feel: the overall appearance of tall, indeed high, large, larger than the average in the tower chassis, the benefits are indeed a lot, first of all to better show the hardware equipment and light pollution, followed by a better The air passage reserved for space, it really does look very big and there are wood. As far as this chassis is concerned, the chassis created for light pollution cannot show its height, height, and height without light pollution. For the thickness of the plate is very objective that I think this price is very good, and the interface reserved in the chassis and the fan, hard disk, all kinds of interfaces are already very adequate, the hard disk is also the most convenient fast lock nowadays Type, as a full side through the chassis, power in the back, including the power cord is also hidden directly from the back, this is a very very much like a design that makes the front can not see the power cord upset, the entire chassis is very Neatness. The 8 fan support and air duct design of this chassis is very good. For the chassis, I think the most important is the three points, the first, the beautiful, the second, all kinds of interfaces and design, convenient and practical, third, the chassis The heat dissipation of the air duct must be better, and the old drivers all know the importance of heat dissipation for hardware protection. To sum up, if you want to choose a large side of the light pollution of the chassis, but also care about less rice, but also the pursuit of his relatively good in all aspects of the situation, I think this case is still very suitable. (What to say is like playing an advertisement)
Written in the end, in fact, get the fan when it is still very troublesome, the interface between the light and the controller is not universal, and finally change the line, a rare toss, your own chassis is still a small achievement! Enclose the chassis to purchase Link's official flagship store:
RGB dimming fan link
7 important things to say three times, I just made an original, original, original)
Laptop Stand 17 Inch Adjustable,Laptop Stand 17 Inch Alienware,Laptop Stand 17 Inch Bed,Laptop Stand 17 Inch Computer,etc.
Shenzhen Chengrong Technology Co.ltd is a high-quality enterprise specializing in metal stamping and CNC production for 12 years. The company mainly aims at the R&D, production and sales of Notebook Laptop Stands and Mobile Phone Stands. From the mold design and processing to machining and product surface oxidation, spraying treatment etc ,integration can fully meet the various processing needs of customers. Have a complete and scientific quality management system, strength and product quality are recognized and trusted by the industry, to meet changing economic and social needs .
Laptop Stand 17 Inch Adjustable,Laptop Stand 17 Inch Alienware,Laptop Stand 17 Inch Bed,Laptop Stand 17 Inch Computer
Shenzhen ChengRong Technology Co.,Ltd. , https://www.dglaptopstandsupplier.com